Terms of Service & Disclaimers
Last updated: October 2026 · Version 1.0
StrikeMade is a small business in Wichita, Kansas. We make custom 3D-printed parts. These terms apply to every quote, order, and part we make. Questions? Email info@strikemade.com.
Â
1. Business customers and consumer customers
Some terms below apply only to Business Customers or only to Consumer Customers.
• Business Customer: you order in the name of a corporation, LLC, co-op, partnership (other than a family partnership), government body, or other organization.
• Consumer Customer: you are an individual, a married couple, a sole proprietor, or a family farm or family partnership. Under Kansas law (K.S.A. 50-624), you are a consumer even if you buy the part for your business or farm.
Kansas law (K.S.A. 50-639) protects consumers' warranty rights. If you are a Consumer Customer, nothing in these terms excludes or limits your rights under Kansas law.
Â
Â
Â
2. What a 3D-printed part is
• We print in plastics such as PETG, ASA, PETG-CF, PLA-CF, and PA6-CF (nylon with carbon fiber).
• Printed parts are built in layers. They are usually weaker between layers.
• A printed part may not match the strength, heat resistance, wear life, or tolerances of the original part.
• Heat, sunlight, moisture, chemicals, vibration, and repeated loads can weaken a part over time. A part can fail suddenly.
Â
Â
Â
3. You approve the spec before we print
Before we print, you approve: (1) the dimensions and design (your file, our model, or a measurement list); (2) the material; and (3) how you plan to use the part.
We print to what you approve. We keep a record of your approval. If anything changes, we ask you to approve again.
We print parts for all uses unless your quote says otherwise. We may decline any job.
Â
Â
Â
4. We do not test, rate, or certify parts
StrikeMade does not test, rate, or certify any part for any load, or for any safety-critical, life-safety, braking, steering, lifting, pressure, or food-contact use.
• We do not do engineering analysis, load testing, or certification.
• Any suggestion we give about design or material is based on what you tell us. It is not an engineering approval or a promise about how the part will perform.
• If you use a part for a load-bearing, safety-critical, life-safety, braking, steering, lifting, pressure, or food-contact purpose, that is your decision and your risk. For Consumer Customers, this is subject to your rights under Kansas law.
Â
Â
5. Your responsibility for suitability and safe use
• You decide whether a part is suitable for your use.
• You are responsible for testing, validating, installing, inspecting, and safely using the part, and for following your equipment maker's instructions and any safety rules that apply to you.
• Test a part under safe, controlled conditions before you rely on it. Keep people clear during testing.
• Shut down and lock out machines before installing or inspecting a part. Keep guards and safety devices in place.
• Inspect parts often. Stop using a part at the first sign of cracking, warping, wear, or layer separation.
• Our parts are not made or approved by the original equipment maker. Using them may affect your equipment warranty.
Consumer Customers: this section explains how we work together. It does not limit your rights under Kansas law.
Â
6. Your files, samples, and reverse-engineered parts
• Your files: If you send a design file, you are responsible for its design, dimensions, material choice, and suitability.
• Reverse-engineered parts: If we model a part from your sample, photos, or measurements, accuracy depends on the sample and the information you give us. Worn or broken samples can produce imperfect copies. Check fit and function before you rely on the part.
• Rights: You confirm you own or have permission to use any file, drawing, sample, or design you give us, and that having us make it does not infringe anyone else's rights.
Â
Â
7. Problems with your part
If something is wrong with your part, email info@strikemade.com with your order number, photos, and a short description.
• We review each reported issue case by case.
• We may ask you to return the part. You pay return shipping, except where Kansas law requires us to cover it.
• Any fix, reprint, or refund is decided case by case.
Consumer Customers: This review process is in addition to your rights under Kansas law. It does not limit them.
Â
Â
8. Warranties
BUSINESS CUSTOMERS – DISCLAIMER OF WARRANTIES
ALL PARTS ARE SOLD "AS IS" AND "WITH ALL FAULTS." STRIKEMADE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION IN YOUR APPROVED SPEC.
Consumer Customers: We do not sell parts "as is" to consumers. Nothing in these terms excludes or limits any implied warranty or any remedy you have under Kansas law.
Â
Â
9. Limits on our liability
BUSINESS CUSTOMERS ONLY. TO THE EXTENT THE LAW ALLOWS:
• STRIKEMADE'S TOTAL LIABILITY FOR ANY CLAIM RELATING TO AN ORDER IS LIMITED TO THE AMOUNT YOU PAID FOR THAT ORDER. MORE THAN ONE CLAIM DOES NOT INCREASE THIS LIMIT.
• STRIKEMADE IS NOT LIABLE FOR INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING DOWNTIME, LOST PROFITS, CROP OR LIVESTOCK LOSS, PRODUCTION LOSS, OR DAMAGE TO OTHER EQUIPMENT OR PROPERTY.
• Any claim must be brought within one year after delivery.
These limits do not apply to death or personal injury caused by our negligence, to our gross negligence or willful misconduct, to fraud, or to anything else the law does not allow us to limit.
Consumer Customers: These limits do not apply to you. Nothing in these terms limits our responsibility to you where Kansas law does not allow it.
Â
Â
10. Indemnification
Business Customers: You will defend and cover StrikeMade for third-party claims, losses, and reasonable attorney fees that arise from (a) any file, design, sample, or information you supplied, including intellectual property claims, (b) how you use, install, or resell the part, or (c) your breach of these terms. This does not apply to the extent a claim is caused by our negligence, gross negligence, or willful misconduct.
Consumer Customers: If someone makes a claim against StrikeMade because a file, design, or sample you gave us infringes their rights, you are responsible for that claim and our reasonable costs of dealing with it.
Â
Â
11. Governing law and where disputes are decided
These terms are governed by Kansas law. Any dispute will be decided in the state courts for Sedgwick County, Kansas, or the United States District Court for the District of Kansas in Wichita.
Consumer Customers: This does not take away your right to bring or defend a claim in any other court the law allows.
Â
Â
12. Other terms
• If any part of these terms can't be enforced, it is limited only as much as needed, and the rest still applies.
• These terms, your quote, and your approved spec are the whole agreement for your order. A promise about how a part will perform counts only if it is written in your quote or approved spec.
• We may update these terms. Each order follows the version in effect when you placed it.
Contact: info@strikemade.com · StrikeMade · Wichita, Kansas
Â
Â
Â
Â